{"params":{"colorway":{"type":"choice","default":"astro-orange","label":"Colorway","describe":"curated kit-palette scheme; sets every zone albedo at once. astro-orange = shipped gunmetal hull with the orange strap; hull-white = pale hull, same orange strap; deep-navy = blue-grey hull; regolith-tan = dusty rust crate for surface cargo; gunmetal-mono = strap and hull both grey, no accent colour","options":["astro-orange","hull-white","deep-navy","regolith-tan","gunmetal-mono"]},"shell":{"type":"color","default":"#737785","label":"Shell","describe":"albedo of the dominant mass: the chamfered hull, the raised frame border around every recess, and the lid cap. This is ~56% of the visible surface"},"panel":{"type":"color","default":"#3d3f47","label":"Recess floors","describe":"albedo of the sunken floors and walls of the five panel recesses, and of the optional skid runners. Keep it darker than Shell or the recesses stop reading as sunken"},"pad":{"type":"color","default":"#dcdee0","label":"Panel inserts","describe":"albedo of the octagonal insert pads standing proud of each recess floor. The lightest value on the crate \u2014 this is what makes it read as sci-fi cargo rather than a plain box"},"band":{"type":"color","default":"#b2684b","label":"Latch band","describe":"albedo of the strap ring wrapping all four sides at mid height and of the buckle plate on the front. The single accent colour; it bisects the silhouette"},"latch":{"type":"color","default":"#975b44","label":"Latch tongue","describe":"albedo of the raised H-shaped tongue bar on the buckle plate. Should stay a few shades darker than Latch band or the buckle flattens out"},"cargo":{"type":"color","default":"#1d1e26","label":"Cargo cavity","describe":"albedo of the enclosed cavity walls and floor behind the lid \u2014 only visible when the lid group is hinged open. Darkest value on the asset"},"chamfer":{"type":"range","default":0.11,"label":"Corner chamfer","describe":"how far each of the four vertical arrises is cut back, in metres per side. Rebuilds the octagonal cross-section every mass is lofted from, so the hull, the lid, the strap ring and the width of the panel recesses all follow. 0.045 = a crisp near-cube with a hairline corner facet; 0.11 = shipped chunky octagon; 0.17 = a deeply cut octagon whose corner facets are as wide as a quarter of the face. Overall 1.2 m footprint is unchanged","affects":"geometry","icon":"\ud83d\udd36","min":0.045,"max":0.17},"lidDepth":{"type":"range","default":0.24,"label":"Lid depth","describe":"height of the lid cap in metres, measured down from the 1.20 m top. The body is rebuilt to the remaining height: the seam and its reveal groove move, the side panel recesses are re-cut, and the insert rows are re-solved so they stay clear of the latch band. 0.15 = a thin shallow cover; 0.24 = shipped; 0.42 = a deep half-and-half chest whose short body only has room for ONE row of inserts under the band (triangle count drops from 736 to 560). Total height stays 1.20 m","affects":"geometry","icon":"\ud83d\udce6","min":0.15,"max":0.42},"inserts":{"type":"choice","default":"2","label":"Insert columns","describe":"number of octagonal insert pads per row on each of the four side faces; the two rows (one above, one below the latch band) are kept. 2 = shipped 2x2 grid per face, 16 side pads; 1 = one centred column, 8 side pads, a sparser industrial hull. The four top-tray inserts are unaffected","affects":"geometry","icon":"\ud83d\udd32","options":["1","2"]},"skids":{"type":"toggle","default":false,"label":"Skid runners","describe":"optional pair of 0.16 m fork-lift skid runners under the flat foot, one just inside the front edge and one just inside the back, with a clear fork gap between them. Off = shipped crate sitting flat on its plinth at y=0; on = the whole crate is lifted 0.16 m onto two dark rails, so it reads as palletised freight and the total height becomes 1.36 m","affects":"geometry","icon":"\ud83d\udef7"}},"presets":{"astro-orange":{"shell":"#737785","panel":"#3d3f47","pad":"#b4b7bc","band":"#b2684b","latch":"#975b44","cargo":"#1d1e26"},"hull-white":{"shell":"#989ea7","panel":"#5f6570","pad":"#b4b7bc","band":"#b2684b","latch":"#975b44","cargo":"#1d1e26"},"deep-navy":{"shell":"#434e67","panel":"#3d3f47","pad":"#989ea7","band":"#b2684b","latch":"#975b44","cargo":"#1d1e26"},"regolith-tan":{"shell":"#856f5d","panel":"#5b4337","pad":"#c1a078","band":"#ac7c64","latch":"#73594d","cargo":"#3e2f2b"},"gunmetal-mono":{"shell":"#5f6570","panel":"#3d3f47","pad":"#b4b7bc","band":"#878c94","latch":"#434e67","cargo":"#1d1e26"}},"rev":1792408799,"materials":{"shell":{"kind":"metal","finish":"brushed"},"panel":{"kind":"metal","finish":"satin"},"pad":{"kind":"plastic","finish":"satin"},"band":{"kind":"plastic","finish":"satin"},"latch":{"kind":"plastic","finish":"satin"},"cargo":{"kind":"paint","finish":"matte"}},"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","preview_v":1792467749,"mod_v":1792408799}