{"params":{"colorway":{"type":"choice","default":"weathered-granite","label":"Colorway","describe":"curated kit-coherent scheme; sets all six zones at once. weathered-granite is the reference: a warm pale carved beast on a cooler grey pedestal with faint green moss, brown eyes and dark red in the ears. fresh-granite is a newly carved pair, almost white, with the moss zone turned to a grey stain and brighter red ears. dark-basalt is near-black volcanic stone with gilded yellow eyes and vermilion ears, the most dramatic against blossom. mossy-shrine keeps grey granite for both pieces with a deeper wet-green moss and a charcoal mouth, for a pair that has stood a century in shade. warm-sandstone re-cuts the pair in honey sandstone on a tan pedestal.","options":["weathered-granite","fresh-granite","dark-basalt","mossy-shrine","warm-sandstone"]},"stone":{"type":"color","default":"#ECE9E2","label":"Carved stone","describe":"albedo of the whole carved beast: head, mane hood and every curl boss, body, legs, paws, tail and teeth. The largest zone and the one that sets the statue's colour. Keep it a visible step away from `plinth` so beast and pedestal separate at a distance."},"plinth":{"type":"color","default":"#E4E6E6","label":"Pedestal stone","describe":"albedo of every pedestal course (foot, base, waist and top slab, however many `courses` builds). The default matches the kit's stone lantern and fence so the shrine pieces read as one quarry."},"moss":{"type":"color","default":"#6FA860","label":"Moss","describe":"albedo of the moss crusts bedded in the pedestal's step crevices and between the forepaws. Only visible when `weathering` is above 0. Take it to grey for lichen staining or deep green for a damp shaded shrine."},"eyes":{"type":"color","default":"#8C7355","label":"Eyes","describe":"albedo of the two bulging painted eyeballs under the brow curls. Brown by default; gold reads as a gilded temple guardian. Keep it well off `stone` or the eyes vanish into the face."},"maw":{"type":"color","default":"#42352A","label":"Mouth interior","describe":"albedo of the recessed back of the open mouth, seen between the teeth. Only built when `mouth` is open. Dark so the maw reads as a real hole behind the fangs; matched to `stone` the open mouth reads as a flat carved plate."},"pigment":{"type":"color","default":"#8E1F1B","label":"Ear pigment","describe":"albedo of the forward-down inner face of each folded ear flap: traces of the red lacquer these statues were once painted with, the one warm accent on the piece. Set it to `stone` colour for a plain unpainted pair."},"mouth":{"type":"choice","default":"open","label":"Mouth","describe":"which twin of the guardian pair this is. open (a-gyo, the default and the reference): jaw dropped 5 cm to show a dark recessed maw with four blocked upper teeth between two long downward fangs and two short upward lower fangs. closed (un-gyo): jaw shut against the upper lip with only the two upper fangs showing over the lower lip, no maw and no front teeth. Shrines place the open one on the right and the closed one on the left as you face the gate; mirror the closed build for a facing pair. Nothing else on the statue changes.","affects":"geometry","options":["open","closed"]},"courses":{"type":"range","default":3,"label":"Pedestal courses","describe":"how many stone courses the pedestal is stacked from. 1: the beast sits on the top slab alone, 0.12 m, a garden-scale statue (1.00 m overall). 2: slab on a wider base course. 3 (reference): slab, recessed waist and base, 0.32 m, 1.20 m overall. 4: adds a broad 0.08 m foot course under the base for a raised shrine-gate plinth (1.28 m overall, 0.69 x 0.79 m footprint). REBUILT, not stretched: every course keeps its own fixed section and height at every value and the beast is identical, only lifted by the stack under it.","affects":"geometry","min":1,"max":4,"step":1},"mane":{"type":"range","default":3,"label":"Mane curl rows","describe":"how far the curled mane reaches down the head, counted in rows of whorl bosses framing each side of the face. 2: a short cropped mane, curls only beside the eyes and nose with the jaw and cheeks bare, one curl on each side of the head (6 mane bosses). 3 (reference): curls framing the face down to beside the jaw plus a second column of two on each side of the head (10). 4: a full mane whose face-framing curls run on down onto the chest below the jaw (12). The brow curls and the two tail scrolls are always carved. Boss size and spacing never change; only how many rows are cut.","affects":"geometry","min":2,"max":4,"step":1},"weathering":{"type":"range","default":0.4,"label":"Moss weathering","describe":"how much moss has grown in the crevices. 0: a clean statue, no moss geometry at all. 0.4 (reference): short tapered moss crusts bedded into the inside corners of the pedestal steps and a small cushion between the forepaws. 1: long drifts nearly filling every step crevice and a broad cushion between the paws. Contact detail only: the stone and its silhouette do not move.","affects":"geometry","min":0,"max":1,"step":0.05}},"presets":{"weathered-granite":{"stone":"#d8d2c4","plinth":"#c7cbcc","moss":"#6fa860","eyes":"#8c7355","maw":"#42352a","pigment":"#8e1f1b"},"fresh-granite":{"stone":"#f2efe7","plinth":"#e4e2dc","moss":"#a9afb4","eyes":"#6b7278","maw":"#4e5459","pigment":"#b5462f"},"dark-basalt":{"stone":"#6b7278","plinth":"#4e5459","moss":"#2f6b4f","eyes":"#f0c24b","maw":"#1b1d20","pigment":"#d6452f"},"mossy-shrine":{"stone":"#c7cbcc","plinth":"#a9afb4","moss":"#3f8a5e","eyes":"#63503c","maw":"#2e3134","pigment":"#8e1f1b"},"warm-sandstone":{"stone":"#d9cfbc","plinth":"#b9a88c","moss":"#9cc46b","eyes":"#7e4b33","maw":"#42352a","pigment":"#b5462f"}},"decals":[{"name":"pedestal-front","size":[0.42,0.075],"at":[0,0.2475,0.34],"normal":[0,0,1],"up":[0,1,0],"describe":"front face of the pedestal top slab, below the forepaws, where a shrine carves the donor inscription","albedo":"#c7cbcc","mode":"plate","relief_mm":0,"verified":true}],"materials":{"stone":{"kind":"stone","finish":"rough"},"plinth":{"kind":"stone","finish":"rough"},"moss":{"kind":"foliage","finish":"moss"},"eyes":{"kind":"paint","finish":"matte"},"maw":{"kind":"stone","finish":"rough"},"pigment":{"kind":"paint","finish":"matte"}},"rev":1792408798,"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","decals_note":"flat areas on the surface where you can print your own logo, sign or number. `at` is the centre in model space, `normal` points out of the surface, `size` is [width, height] in metres. Bake art with https://polyfork.dev/cdn/sdf.mjs and place it with https://polyfork.dev/cdn/decal.mjs, or use `at`/`normal`/`size` directly in any engine. `albedo` is the colour it prints on. mode `plate` means the face is flat and a quad is enough; `projected` means it is curved (`relief_mm` deep) and the mark has to be projected onto the geometry. Measured on the DEFAULT build: a geometry knob can move the surface a few centimetres; decal.mjs follows it, anywhere else re-measure or keep the defaults.","preview_v":1792462887,"mod_v":1792408798}