{"params":{"colorway":{"type":"choice","default":"polar-cyan","label":"Colorway","describe":"Curated kit-coherent scheme, all two-tone across the hull waterline. polar-cyan = off-white upper hull over a kit-cyan lower half on a dark gunmetal cradle (the approved default); astro-amber swaps the lower half to the kit rust-orange over a slate cradle; gunmetal is a darker utility tank with a deep slate-blue bottom; regolith is a dust-tan hull over brown for weathered field gear.","affects":"colors","options":["polar-cyan","astro-amber","gunmetal","regolith"]},"hull":{"type":"color","default":"#dcdee0","label":"Upper hull","describe":"Albedo of the upper half of the pressure vessel \u2014 every facet above the hull mid-line, barrel and both end domes. Keep it the lightest value in the asset; the lower half takes the accent hue.","affects":"colors"},"band":{"type":"color","default":"#47b7b1","label":"Lower hull","describe":"Albedo of the ENTIRE lower half of the vessel \u2014 every facet below the hull mid-line, barrel and both end domes, cut dead level on the equator. Two-tone paint, so this reads as roughly half the object: give it a chromatic hue that carries against the pale upper hull rather than a near-neutral.","affects":"colors"},"cradle":{"type":"color","default":"#3d3f47","label":"Cradle","describe":"Albedo of the two straps that wrap over the hull and the four legs that drop from them. Wants a clear dark step below the hull so the straps cut the capsule into thirds.","affects":"colors"},"pads":{"type":"color","default":"#5f6570","label":"Foot pads","describe":"Albedo of the two flat ground pads the legs stand on. Sits one value step LIGHTER than the cradle so the pads do not merge with the straps into one black mass when the model is viewed from below; reads as bare skid plate under painted steel.","affects":"colors"},"tankLength":{"type":"range","default":1,"label":"Tank length","describe":"Lengthens the straight barrel run (the end domes keep their shape), so the whole tank goes from 1.99 m at 0.78 \u2014 a stubby drum barely longer than it is wide \u2014 to 2.62 m at 1.12, a long slim cylinder. It REBUILDS the stand rather than stretching it: saddles sit at most 1.42 m apart (the shipped span), so a tank longer than the default gains a THIRD saddle \u2014 strap, two legs and its own foot pad \u2014 on the centreline, and the three then spread evenly over the barrel. 2 saddles / 344 tris at 0.78, 3 saddles / 420 tris at 1.12. The strap keeps its 0.10 m width at every length.","affects":"geometry","min":0.78,"max":1.12},"girth":{"type":"range","default":1,"label":"Girth","describe":"Hull diameter, from 0.92 m at 0.84 (a slim gas cylinder) to 1.28 m at 1.16 (a fat bulk tank almost as deep as it is long). A pressure vessel has nothing repeating AROUND its girth except the plates it is rolled from, so that is what this rebuilds: the facet CHORD is held at its shipped width and the segment count follows the diameter, giving 10 sides at 0.84 and 14 at 1.16 (12 at the default) \u2014 the fat tank is made of MORE plates the same size, not of stretched ones. The strap and legs keep their 0.10 x 0.075 m section at every diameter; only the wrap radius and the pad width follow the hull. 10 sides / 300 tris at 0.84, 14 sides / 412 tris at 1.16.","affects":"geometry","min":0.84,"max":1.16},"facets":{"type":"choice","default":"standard","label":"Facets","describe":"How WIDE a hull plate is, quoted as the segment count at the default girth: chunky = 8 sides, a hard octagonal barrel; standard = 12 (the approved default); smooth = 16, a rounder hull with a wider strap wrap. The count itself is re-derived from the diameter (see girth) so the chord stays put. Changes the outline, not the proportions \u2014 the two-tone waterline stays on the equator at every setting because the ring count is always even and so always has vertices there.","affects":"geometry","options":["chunky","standard","smooth"]},"standHeight":{"type":"range","default":1,"label":"Stand height","describe":"Ground clearance under the belly, from 0.05 m at 0.25 (the tank almost resting in the dust, legs nearly gone) to 0.42 m at 2.1 (tall trestle legs with a walk-under gap). The vessel and the strap wrap are untouched; the STAND rebuilds. Legs hold a 0.45 m bracing bay, so once the drop past the strap exceeds that \u2014 above about 1.11 \u2014 each saddle gains a horizontal cross-tie between its two legs, giving 344 tris at 0.25 and 360 at 2.1. The legs keep the strap's own 0.10 x 0.075 m section at every height; only their length changes.","affects":"geometry","min":0.25,"max":2.1},"scale":{"type":"range","default":1,"label":"Scale","describe":"Scales the whole model; 1 is as built. Real-world size is in this range (real length is 6-15 m, as built 2.4 m).","affects":"geometry","min":1,"max":6.9,"step":0.05}},"presets":{"polar-cyan":{"hull":"#dcdee0","band":"#47b7b1","cradle":"#3d3f47","pads":"#5f6570"},"astro-amber":{"hull":"#dcdee0","band":"#b2684b","cradle":"#434e67","pads":"#737785"},"gunmetal":{"hull":"#989ea7","band":"#434e67","cradle":"#1d1e26","pads":"#5f6570"},"regolith":{"hull":"#c1a078","band":"#975b44","cradle":"#3d3f47","pads":"#856f5d"}},"rev":1792617922,"materials":{"hull":{"kind":"paint","finish":"eggshell"},"band":{"kind":"paint","finish":"eggshell"},"cradle":{"kind":"metal","finish":"satin"},"pads":{"kind":"metal","finish":"satin"}},"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","preview_v":1792617960,"mod_v":1792617922}