{"params":{"colorway":{"type":"choice","default":"gunmetal","label":"Colorway","describe":"curated metal scheme, all kit-coherent. gunmetal is the reference: a cool blue-grey cast-iron housing, barrel and chuck body, brass wrist collar, shoulder collars and chuck ring, copper clamp courses strapping the barrel, bright steel jaw noses and rivets. bronzework takes the whole structural mass down to a deep bronze and softens the steel to a warm grey, so the brass and copper hardware reads two rungs lighter than the body it is bolted to \u2014 a mount dressed to match the kit's brass exoskeleton. blackiron drops the iron to near-neutral dark grey, takes the hardware down from brass to copper and the courses to raw hot copper \u2014 the foundry version. The amber jewel is the same in all three, and every one keeps the cut cavities darkest and the amber brightest","options":["gunmetal","bronzework","blackiron"]},"iron":{"type":"color","default":"#4F5D75","label":"Iron","describe":"albedo of the iron zone"},"bore":{"type":"color","default":"#2C3E50","label":"Bore","describe":"albedo of the bore zone"},"brass":{"type":"color","default":"#B8860B","label":"Brass","describe":"albedo of the brass zone"},"copper":{"type":"color","default":"#CD7F32","label":"Copper","describe":"albedo of the copper zone"},"steel":{"type":"color","default":"#C0C0C0","label":"Steel","describe":"albedo of the steel zone"},"lens":{"type":"color","default":"#FFD166","label":"Lens","describe":"albedo of the lens zone"},"hand":{"type":"choice","default":"left","label":"Hand","describe":"which hand: right is the exact mirror, joints included, so it fits a tracked right hand","affects":"geometry","options":["left","right"]},"girth":{"type":"range","default":1,"label":"Arm girth","describe":"the girth of the ARM this mount was machined for, not a size control on the object: the wrist section is re-solved at the value given and the socket collar, the brass land and the slab housing are rebuilt on it, 44.0 mm across the collar at 0.85 and 54.8 mm at 1.3 against 47.6 at the reference. The tool head does NOT scale with it \u2014 the bored socket, the ball knuckles and the three jaws are made stock at every value, because a chuck of a given capacity is the same chuck on a slim arm and a heavy one, so the taper of the barrel between them is what takes up the difference. Nothing about fingers or palms applies here; this part builds neither","affects":"geometry","min":0.85,"max":1.3,"step":0.05},"bands":{"type":"range","default":3,"label":"Clamp courses","describe":"how many proud copper clamp courses strap the turned barrel between the shoulder collar and the chuck. The course itself is the same 4.2 mm ring standing 1.1 mm proud at every value \u2014 only the count and the spacing change, so the triangle count moves with the knob rather than the geometry stretching. 2 leaves the barrel long and bare between two wide straps, 3 is the reference, 5 packs it into a close-pitched sleeve that reads as a bound cable run from across a room","affects":"geometry","min":2,"max":5,"step":1},"grip":{"type":"range","default":1,"label":"Gripper capacity","describe":"what size of extension the gripper takes. The bored socket opens 7.3 mm across at 0.7 and 13.5 mm at 1.3 against 10.4 mm at the reference, and the jaws' gripping faces slide with it: the THUMB's is the adjustable jaw of the pincer and travels about 13 mm across the knob, the index's and the middle's a third of that, so the mouth winds open and shut without the two finger jaws ever closing on one another. The ball knuckles, the arms, the chuck ring and the barrel are unchanged stock at every value \u2014 this is the gripper being wound, not the tool head being scaled","affects":"geometry","min":0.7,"max":1.3,"step":0.05},"fitted":{"type":"choice","default":"plug","label":"Fitted","describe":"what is in the socket. plug is the reference and the state the mount ships in: a turned brass blanking plug seated in the bore's lead-in with a domed head level with the brass land, so the front elevation is a bright ring, a dark stepped well and a made terminal rather than an open hole, with the dark annulus continuous round the dome at every azimuth. none pulls it and leaves the bore empty 16 mm down to its floor, the mount ready for one of the kit's extensions. rod fits a plain iron extension rod, 45 mm proud of the chuck face, with a brass ferrule and a domed cap; it runs out between the three jaws and never touches one in any tracked pose (0.6 mm is the closest they come) \u2014 the state that shows what the socket is for","affects":"geometry","options":["plug","none","rod"]}},"presets":{"gunmetal":{"iron":"#4F5D75","bore":"#2C3E50","brass":"#B8860B","copper":"#CD7F32","steel":"#E1E1E1","lens":"#FFD166"},"bronzework":{"iron":"#6A431D","bore":"#2C3E50","brass":"#B8860B","copper":"#CD7F32","steel":"#C4B0A0","lens":"#FFD166"},"blackiron":{"iron":"#4D4D4D","bore":"#2C3E50","brass":"#CD7F32","copper":"#C04000","steel":"#E1E1E1","lens":"#FFD166"}},"night":{"lens":{"color":"#FFD166","intensity":0.85,"describe":"the amber charge jewel on the housing crown, burning when the mount is powered","albedo":"#ffd166","findable":true}},"rev":1792408797,"materials":{"iron":{"kind":"metal","finish":"cast"},"bore":{"kind":"metal","finish":"satin"},"brass":{"kind":"metal","finish":"polished"},"copper":{"kind":"metal","finish":"satin"},"steel":{"kind":"metal","finish":"satin"},"lens":{"kind":"glass","finish":"clear"}},"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","night_note":"match `albedo` in COLOR_0 exactly, make those vertices emissive at `color` and `intensity`, and drop your scene lights. findable false means that colour is no longer in this asset's geometry: skip the zone rather than guessing.","preview_v":1792437761,"mod_v":1792408797}