{"params":{"colorway":{"type":"choice","default":"gunmetal","label":"Colorway","describe":"curated metal scheme, all kit-coherent. gunmetal is the reference: a cool blue-grey cast-iron socket collar, housing, barrel, hub and finger links, brass at every terminus \u2014 the land at the wrist cut, the ring on the end face, the shoulder and hub collars, the jaw ring and the three knuckle drums \u2014 copper clamp courses, pivot sockets and journal collars, and bright steel talons and rivets. bronzework takes the whole structural mass down to a deep bronze and softens the steel to a warm grey, so the brass and copper hardware reads two rungs lighter than the body it is bolted to \u2014 a claw dressed to match the kit's brass exoskeleton. blackiron drops the iron to near-neutral dark grey and takes the hardware down a notch, brass to copper and copper to raw hot copper: the foundry version. The amber charge is the same in all three, and every one keeps the cut cavities darkest and the amber brightest","options":["gunmetal","bronzework","blackiron"]},"iron":{"type":"color","default":"#4F5D75","label":"Iron","describe":"albedo of the iron zone"},"bore":{"type":"color","default":"#2C3E50","label":"Bore","describe":"albedo of the bore zone"},"brass":{"type":"color","default":"#B8860B","label":"Brass","describe":"albedo of the brass zone"},"copper":{"type":"color","default":"#CD7F32","label":"Copper","describe":"albedo of the copper zone"},"steel":{"type":"color","default":"#C0C0C0","label":"Steel","describe":"albedo of the steel zone"},"lens":{"type":"color","default":"#FFD166","label":"Lens","describe":"albedo of the lens zone"},"hand":{"type":"choice","default":"left","label":"Hand","describe":"which hand: right is the exact mirror, joints included, so it fits a tracked right hand","affects":"geometry","options":["left","right"]},"girth":{"type":"range","default":1,"label":"Girth","describe":"flesh thickness around the FIXED tracked skeleton, rebuilt section by section: 0.85 a slim, bony hand, 1.0 the reference, 1.3 a chunky cartoon paw with fat fingers and a deep palm. The joints never move, so any value still fits hand tracking; the triangle count is set by facets, not by this","affects":"geometry","min":0.85,"max":1.3,"step":0.05},"fingers":{"type":"range","default":3,"label":"Jaws","describe":"how many tapering claw fingers stand on the hub, and EVERY one of them is driven by a tracked bone \u2014 this is not a count of decorations. It REBUILDS rather than stretches: each jaw is the same recipe, a serrated keeled link off its own copper pivot socket, a brass knuckle drum centred on a real knuckle and a serrated talon raking at the grab centre, so the count moves the triangle budget with it (2,334 at 3, 2,712 at 4) and widens the tool from 82 to 90 mm. 3 is the reference and the three the part is named for: THUMB, INDEX and MIDDLE, their drums on thumb-phalanx-proximal, index-finger-phalanx-proximal and middle-finger-phalanx-proximal, standing 16 / 25 / 9 mm apart blade to blade with real daylight in the mouth and shutting to 11 / 10 / 6 on a fist. 4 adds the RING finger's jaw on the +x flank, which closes the mouth into a four-point cage a round load cannot roll out of; the ring bends 74 degrees on a point and 86 on a fist, so it is a working jaw and not an anvil","affects":"geometry","min":3,"max":4,"step":1},"talon":{"type":"choice","default":"chisel","label":"Talon","describe":"what each finger terminates in past its knuckle drum, which is the claw's whole read at a distance; the socket collar, the housing, the barrel, the hub and every finger link are identical at every value, and all three talons carry the same station count so the triangle count does not move (2,334 throughout). Each is quoted at the index jaw; the middle's blade is 8% longer and the thumb's a third longer again, because the thumb's knuckle sits 35 mm further back down the tool. chisel is the reference and what the refs draw: 42 mm of serrated blade raking in onto a broad flat edge half the width of its own stock, jaws that plainly close on something, the tool 171 mm end to end. needle is 54 mm at a much shallower turn, drawn to a small square point \u2014 a probe or a picker rather than a grip, and the longest silhouette of the three at 183 mm. hook curls hard in over 35 mm and closes blunt, so the points come back at each other and enclose a real hole of daylight: the grabbing version, and the most compact at 165 mm","affects":"geometry","options":["chisel","needle","hook"]},"spread":{"type":"range","default":1,"label":"Spread","describe":"how far the jaws stand OPEN at rest. Only how hard each talon RAKES at the grab centre is scaled \u2014 every link keeps its length, section and serration, every blade keeps its own length, and every knuckle drum stays exactly on the tracked joint the bone will turn it about \u2014 so this is the aperture rather than a size knob, and the triangle count is identical at every value (2,334 throughout). Measured blade to blade at the bind pose: 0.70 gathers them into a closed nipper, 17 / 22 / 5 mm apart, and the part reads as a tool already holding something; 1.0 is the reference at 16 / 25 / 9 mm with the thumb's point 39 mm off the tool's axis; 1.45 lets them out to 29 / 49 / 14 mm and swings that point back out to 60 mm, an open cage that reads as a grab from across a room. It floors at 0.70 because below that the index and the middle blades close to within 2 mm of each other and read as one wedge. It composes with talon: a wide spread on a hook is a cage, a narrow one on a needle is a pair of dividers","affects":"geometry","min":0.7,"max":1.45,"step":0.05},"bands":{"type":"range","default":2,"label":"Clamp courses","describe":"how many proud copper clamp courses strap the turned barrel between the shoulder collar and the hub. The course itself is the same 3.4 mm ring standing 1.1 mm proud at every value \u2014 only the count and the spacing change, so the triangle count moves with the knob rather than the geometry stretching (2,238 / 2,334 / 2,430). 1 leaves the barrel long and bare between the two collars, 2 is the reference, 3 packs it into a close-pitched sleeve that reads as a bound cable run at thumbnail size. It stops at 3 because the barrel is 14 mm long: a fourth course would have to be pitched closer than its own width, which crowds a repeat into one smudged hoop","affects":"geometry","min":1,"max":3,"step":1}},"presets":{"gunmetal":{"iron":"#4F5D75","bore":"#2C3E50","brass":"#B8860B","copper":"#CD7F32","steel":"#E1E1E1","lens":"#FFD166"},"bronzework":{"iron":"#6A431D","bore":"#2C3E50","brass":"#B8860B","copper":"#CD7F32","steel":"#C4B0A0","lens":"#FFD166"},"blackiron":{"iron":"#4D4D4D","bore":"#2C3E50","brass":"#CD7F32","copper":"#C04000","steel":"#E1E1E1","lens":"#FFD166"}},"night":{"lens":{"color":"#FFD166","intensity":0.85,"describe":"the amber charge on the housing crown, burning when the claw is powered","albedo":"#ffd166","findable":true}},"rev":1792408797,"materials":{"iron":{"kind":"metal","finish":"cast"},"bore":{"kind":"metal","finish":"satin"},"brass":{"kind":"metal","finish":"polished"},"copper":{"kind":"metal","finish":"polished"},"steel":{"kind":"metal","finish":"brushed"},"lens":{"kind":"glass","finish":"clear"}},"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","night_note":"match `albedo` in COLOR_0 exactly, make those vertices emissive at `color` and `intensity`, and drop your scene lights. findable false means that colour is no longer in this asset's geometry: skip the zone rather than guessing.","preview_v":1792437782,"mod_v":1792408797}