{"params":{"colorway":{"type":"choice","default":"harbour-blue","label":"Colorway","describe":"Curated paint schemes from the Coast kit menu. harbour-blue: blue bottom and sheer strakes either side of a white band under a tan rail, white cuddy with a grey roof (the reference boat). sea-green: dark sage hull, cream band. tarred: near-black tarred hull with a cream band. aqua and salmon: the beach huts' pastels on the hull. Every scheme keeps a pale band and cuddy against a darker or brighter hull, the tan timber rail and interior, and salmon-and-yellow (or aqua-and-yellow) pot buoys.","options":["harbour-blue","sea-green","tarred","aqua","salmon"]},"tide":{"type":"range","default":0.4,"label":"Tide","describe":"What the water has done to the boat, for the kit water plane at y = 0.60 x tide. 0 is low water on a still morning: she stands chocked upright on her cradle, hull dry, with the fullest clump of dried weed wound on the pot hauler and bulging past its plates, nine ragged tails hanging off it, and the mooring line lying slack on the ground to its stake. 0.4 (default) is the reference look: still on the cradle, a thinner clump with five shorter tails. By 0.7 the hauler has been washed clean; from about 0.73 the water reaches her painted waterline and she lifts off the cradle. At 1 (high water in a blow) she floats on her marks with her keel 0.30 m off the ground, lying 0.5 m back on a dead-taut mooring line and heeled 3 degrees, with the waterline strake skinned in green weed along the boot top and broad weed fronds lying out on the surface; the skids, shore legs and keel blocks stand empty and dry under and behind her. The cradle, stake and rope coil keep the model standing on y = 0 at every value. With parked off she is the boat alone and tide never moves her: it only changes the weed on the hauler and at her waterline.","affects":"geometry","min":0,"max":1,"step":0.1},"weather":{"type":"range","default":0.5,"label":"Weather","describe":"Salt and sun, plank by plank. 0 is fresh paint and oiled timber, one tone per zone. Higher values chalk each painted topside strake (the white band and the blue sheer strakes) paler by its own amount, the same amount on both sides, and silver each length of the tan gunwale capping toward salt-grey, so at 1 the hull reads as a countable mix of fresh and chalky planks under a silvered rail. Colour only: no geometry changes, and the bottom paint, the transom (name decal) and the cuddy walls (registration decals) never move.","min":0,"max":1,"step":0.05},"beam":{"type":"range","default":2.3,"label":"Beam","describe":"Width of the hull over the rubbing strakes in metres. Rebuilds every station at constant lap, rail, plank and keel sizes; the transom, thwarts, raised sole, hauler rail post, pump hose and the cradle's shore legs and braces all follow the new skin, while the cuddy, the outboard well and the buoys keep their size, so the side decks beside the cuddy widen or narrow. 2.05 is a slim, easily launched boat; 2.55 a fat, stable beach boat. Length stays 6 m.","affects":"geometry","min":2.05,"max":2.55,"step":0.05},"strakes":{"type":"range","default":7,"label":"Strakes","describe":"Number of lapped planks a side, whole numbers only, resampled off one master section so the hull outline stays the same and only the plank count changes. Each plank adds a real proud lap step with its own shadow line. 5 reads as bold, slab-sided planking; 9 as close, round-bilged planking. The paint bands always change at a lap: blue bottom strakes up to about a quarter of the depth (where the waterline sits), a white band up to the lap nearest 55% of the depth, blue sheer strakes above, tan rail.","affects":"geometry","min":5,"max":9,"step":1},"buoys":{"type":"range","default":4,"label":"Pot buoys","describe":"How many pot buoys are lashed on the forward thwart in front of the cuddy, whole numbers only, from one fixed pile: they fill the thwart three abreast from the port side, then stack in a second and third tier, and one rope lashing runs over whatever is there. 0 leaves a bare thwart and no lashing; 6 is a three-tier pyramid standing well above the rail. Buoys alternate the two buoy colours.","affects":"geometry","min":0,"max":6,"step":1},"parked":{"type":"toggle","default":true,"label":"Parked","describe":"On (default): she is parked on the hard, chocked upright on her timber cradle (two trestles of skids, shore legs and keel blocks, and a loose skid under the forefoot) with a mooring line from the samson post over the stem fairlead to an iron stake, and tide floats her off the cradle onto that mooring at high water. Off: the boat alone, for driving as a vehicle: no cradle, skids, stake or mooring line; she sits upright and level, centred on her own hull, with the outboard skeg (her lowest point) on y = 0 and her painted waterline 0.35 m up, which is where a game's water surface belongs. The outboard steers (rig outboard, about the vertical axis) and its propeller spins (rig propeller, about the shaft). Tide never moves her when unparked; it only changes the weed: dried weed on the hauler at low water, the weed strake and floating fronds at her waterline at high water.","affects":"geometry"},"hull":{"type":"color","default":"#A6B7D6","label":"Hull","describe":"Albedo of the blue paint: the bottom strakes and keel below the white band, and the sheer strakes above it, plus the matching bands across the transom. The boat's main colour."},"white":{"type":"color","default":"#EDF4FF","label":"Band and cuddy","describe":"Albedo of the white paint: the band of strakes between the bottom and the sheer strakes, the stem post, the band across the transom and the cuddy walls."},"capping":{"type":"color","default":"#B8A484","label":"Rail","describe":"Albedo of the tan timber rubbing strake and gunwale capping that run round the top of the hull and across the transom head; weather silvers it."},"inner":{"type":"color","default":"#A28E74","label":"Interior","describe":"Albedo of the timber interior: the inside of the planking, floorboards, thwarts, risers, foredeck and the raised sole the cuddy stands on."},"roof":{"type":"color","default":"#7C7871","label":"Cuddy roof","describe":"Albedo of the cuddy's slab roof and its aft door."},"glass":{"type":"color","default":"#474540","label":"Windows","describe":"Albedo of the cuddy's recessed window panes (dark glass; the boat carries no light at night)."},"fittings":{"type":"color","default":"#D7DFDC","label":"Fittings","describe":"Albedo of the galvanised ironwork: the pot hauler's plates, pole, rail post and motor, the wire stay, the samson post and stem fairlead, the bilge pump, the outboard's propeller, and the mooring stake and ring."},"motor":{"type":"color","default":"#6B665E","label":"Outboard and hose","describe":"Albedo of the dark grey plastics: the outboard's cowling, leg, tiller and clamp, and the bilge pump hose hanging over the port rail."},"rope":{"type":"color","default":"#ECE7DE","label":"Rope","describe":"Albedo of the hemp mooring line from the samson post to the stake, its tail coiled on the ground, and the lashing over the pot buoys."},"timber":{"type":"color","default":"#7E6E59","label":"Cradle","describe":"Albedo of the weathered cradle timber: the skids across the ground, the upright shore legs, the V braces and the keel blocks."},"buoyA":{"type":"color","default":"#E9B6A4","label":"Buoys (first)","describe":"Albedo of every other pot buoy, starting with the outboard one on the thwart."},"buoyB":{"type":"color","default":"#EDD68F","label":"Buoys (second)","describe":"Albedo of the remaining pot buoys, alternating with the first buoy colour."},"weed":{"type":"color","default":"#4E6B45","label":"Wet weed","describe":"Albedo of the wet weed at high water: the strake that carries the waterline, skinned in weed along the boot top, and the broad fronds rooted there lying out on the surface (only once she floats, tide about 0.73 and up)."},"wrack":{"type":"color","default":"#5C4F42","label":"Dried weed","describe":"Albedo of the dried weed wound into the pot hauler's groove and hanging off it in ragged tails at low water (tide below 0.7; fullest and bulging past the plates at 0)."}},"presets":{"harbour-blue":{"hull":"#A6B7D6","white":"#EDF4FF","capping":"#B8A484","inner":"#A28E74","roof":"#7C7871","glass":"#474540","fittings":"#D7DFDC","motor":"#6B665E","rope":"#ECE7DE","timber":"#7E6E59","buoyA":"#E9B6A4","buoyB":"#EDD68F","weed":"#4E6B45","wrack":"#5C4F42"},"sea-green":{"hull":"#6B7F6A","white":"#F5F2EB","capping":"#C1AE92","inner":"#A28E74","roof":"#8C857A","glass":"#474540","fittings":"#A6B7D6","motor":"#6B665E","rope":"#ECE7DE","timber":"#7E6E59","buoyA":"#E9B6A4","buoyB":"#EDD68F","weed":"#35472F","wrack":"#5C4F42"},"tarred":{"hull":"#474540","white":"#F5F2EB","capping":"#A28E74","inner":"#9A8968","roof":"#8C857A","glass":"#35472F","fittings":"#D7DFDC","motor":"#6B665E","rope":"#ECE7DE","timber":"#7E6E59","buoyA":"#E9B6A4","buoyB":"#EDD68F","weed":"#4E6B45","wrack":"#8A4B32"},"aqua":{"hull":"#9FC6C2","white":"#F8F6F0","capping":"#C1AE92","inner":"#A28E74","roof":"#7C7871","glass":"#474540","fittings":"#A6B7D6","motor":"#6B665E","rope":"#ECE7DE","timber":"#7E6E59","buoyA":"#E9B6A4","buoyB":"#EDD68F","weed":"#4E6B45","wrack":"#5C4F42"},"salmon":{"hull":"#E9B6A4","white":"#F8F6F0","capping":"#B8A484","inner":"#A28E74","roof":"#7C7871","glass":"#474540","fittings":"#D7DFDC","motor":"#6B665E","rope":"#ECE7DE","timber":"#7E6E59","buoyA":"#9FC6C2","buoyB":"#EDD68F","weed":"#4E6B45","wrack":"#5C4F42"}},"decals":[{"name":"transom","size":[0.9,0.15],"at":[0,0.98,-3.3338],"normal":[0,-0.1427,-0.9898],"up":[0,0.9898,-0.1427],"describe":"the boat's name: the flat raked outer face of the transom, across the upper bands below the capping","albedo":"#a6b7d6","mode":"plate","relief_mm":0,"verified":true},{"name":"cuddy-port","size":[0.9,0.24],"at":[0.5961,1.495,-0.8908],"normal":[0.9996,0.0278,0],"up":[-0.0278,0.9996,0],"describe":"the registration letters: the flat port wall of the cuddy between the rail and the windows","albedo":"#edf4ff","mode":"plate","relief_mm":0,"verified":true},{"name":"cuddy-starboard","size":[0.9,0.24],"at":[-0.5961,1.495,-0.8908],"normal":[-0.9996,0.0278,0],"up":[0.0278,0.9996,0],"describe":"the registration letters: the flat starboard wall of the cuddy between the rail and the windows","albedo":"#edf4ff","mode":"plate","relief_mm":0,"verified":true}],"materials":{"hull":{"kind":"paint","finish":"eggshell"},"white":{"kind":"paint","finish":"eggshell"},"capping":{"kind":"wood","finish":"oiled"},"inner":{"kind":"wood","finish":"oiled"},"roof":{"kind":"paint","finish":"matte"},"glass":{"kind":"glass","finish":"clear"},"fittings":{"kind":"metal","finish":"satin"},"motor":{"kind":"plastic","finish":"satin"},"rope":{"kind":"fabric","finish":"linen"},"timber":{"kind":"wood","finish":"raw"},"buoyA":{"kind":"plastic","finish":"gloss"},"buoyB":{"kind":"plastic","finish":"gloss"},"weed":{"kind":"foliage","finish":"leaf"},"wrack":{"kind":"foliage","finish":"leaf"}},"rev":1792408796,"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","decals_note":"flat areas on the surface where you can print your own logo, sign or number. `at` is the centre in model space, `normal` points out of the surface, `size` is [width, height] in metres. Bake art with https://polyfork.dev/cdn/sdf.mjs and place it with https://polyfork.dev/cdn/decal.mjs, or use `at`/`normal`/`size` directly in any engine. `albedo` is the colour it prints on. mode `plate` means the face is flat and a quad is enough; `projected` means it is curved (`relief_mm` deep) and the mark has to be projected onto the geometry. Measured on the DEFAULT build: a geometry knob can move the surface a few centimetres; decal.mjs follows it, anywhere else re-measure or keep the defaults.","preview_v":1792420508,"mod_v":1792408796}