{"params":{"sleeve":{"type":"color","default":"#CD7F32","label":"Sleeve","describe":"albedo of the sleeve zone"},"ram":{"type":"color","default":"#2C3E50","label":"Ram","describe":"albedo of the ram zone"},"rod":{"type":"color","default":"#C0C0C0","label":"Rod","describe":"albedo of the rod zone"},"collar":{"type":"color","default":"#B8860B","label":"Collar","describe":"albedo of the collar zone"},"hose":{"type":"color","default":"#8C6239","label":"Hose","describe":"albedo of the hose zone"},"lens":{"type":"color","default":"#FFD166","label":"Lens","describe":"albedo of the lens zone"},"hand":{"type":"choice","default":"left","label":"Hand","describe":"which hand: right is the exact mirror, joints included, so it fits a tracked right hand","affects":"geometry","options":["left","right"]},"girth":{"type":"range","default":1,"label":"Girth","describe":"flesh thickness around the FIXED tracked skeleton, rebuilt section by section: 0.85 a slim, bony hand, 1.0 the reference, 1.3 a chunky cartoon paw with fat fingers and a deep palm. The joints never move, so any value still fits hand tracking; the triangle count is set by facets, not by this","affects":"geometry","min":0.85,"max":1.3,"step":0.05},"knuckles":{"type":"range","default":1,"label":"Knuckles","describe":"how bony the joints read: 0.3 smooth tapered fingers and a flat back of the hand, 1.0 the reference, 1.6 every joint swollen into a knob and the knuckle mounds standing proud","affects":"geometry","min":0.3,"max":1.6,"step":0.1},"reach":{"type":"range","default":0.09,"label":"Reach","describe":"how far the copper sleeve runs back up the forearm from the bracelet cut, in metres. It REBUILDS rather than stretching: the riveted strap bands multiply at a constant 24 mm pitch, so a longer sleeve gains a whole band with its ring of six domed rivets, and the ram gains cylinder body between its gland and its steel bands \u2014 2,330 triangles at the short end, 2,534 at the default and 2,738 at the long one. 0.080 is a stub barrel with ONE strap band and a short stubby ram; 0.090 is the reference the brief asks for, two bands and a ram about half the sleeve long; 0.108 runs three bands and reads as a full vambrace with a long-stroke ram. The clamp collar, the bore, the sight glass, the rod, the gland, the band and rivet SIZES and the fork are the same stock at every value \u2014 only lengths and counts move","affects":"geometry","min":0.08,"max":0.108,"step":0.002},"roundness":{"type":"range","default":0.85,"label":"Roundness","describe":"how far the sleeve's cross-section is rounded up from the flat slab of the wrist inside it toward a regular 12-gon. The sleeve has to clear a 40 x 24 mm wrist whatever this is, so the part's WIDTH never moves (92.5 mm across the rams at every value) and the knob is read entirely in the DEPTH: 63.5 mm overall at 0.70, an oval sleeve that still remembers the arm it came off; 70.7 mm at 0.85, the reference barrel; 78.0 mm at 1.00, a true regular 12-gon as deep as it is wide and the fattest, most plumbing-like of the three. Every band, rivet, bolt, ram bracket and hose control point rebuilds onto the new section; the triangle count does not move because nothing is added or taken away","affects":"geometry","min":0.7,"max":1,"step":0.02},"endFitting":{"type":"choice","default":"fork","label":"End fitting","describe":"what the far end of the sleeve terminates in \u2014 the wrist end, the collar, the rams and the hose are identical in all three, so any of them wears the same way. fork is the reference: a stepped cast lip round a dark recessed end plate with TWO square prongs standing 18 mm off it at the flanks, a mounting fork with real daylight between the tines. union swaps lip and prongs for a brass flange the size of the wrist collar with its own four hex bolts and a bore open right through, so the part reads as a spool that bolts on to another pipe. cap bolts a domed steel BLIND FLANGE over the end \u2014 a crowned face proud of the rim with four dark heads round it \u2014 which is the sleeve with nothing plugged into it","affects":"geometry","options":["fork","union","cap"]},"hoseRun":{"type":"choice","default":"loop","label":"Hose run","describe":"how the braided hose is plumbed. loop is the reference: ONE hose leaving both rams' outboard ports, sweeping down round the sleeve's flanks and joining under the wrist in a single deep U that breaks the underside of the outline. twin cuts it into a short hose per ram, each curling down the flank into its own brass manifold block on the clamp collar, so the underside stays clear and the flanks carry two tight coils instead \u2014 the tidier, more industrial read, and the one to pick when something else is worn on the palm","affects":"geometry","options":["loop","twin"]},"colorway":{"type":"choice","default":"copper-works","label":"Colorway","describe":"curated kit-coherent metal scheme, setting all six zones at once. copper-works is the reference: a copper sleeve, dark navy-iron rams, bright steel rods and brass rings. brass-foundry re-metals it warm \u2014 a brass sleeve with copper rings and near-white steel over slate rams. blued-steel is the cold reading: a grey steel sleeve, deep teal rams and dark grey hose, with the brass kept only on the rings. oxblood-copper is the loudest \u2014 a red oxide sleeve and gold collars over graphite rams. The amber sight glass is the same #FFD166 in all four; explicit colour knobs override whichever scheme is picked","options":["copper-works","brass-foundry","blued-steel","oxblood-copper"]}},"presets":{"copper-works":{"sleeve":"#CD7F32","ram":"#2C3E50","rod":"#E1E1E1","collar":"#B8860B","hose":"#8C6239","lens":"#FFD166"},"brass-foundry":{"sleeve":"#B8860B","ram":"#4F5D75","rod":"#F4F4F4","collar":"#CD7F32","hose":"#5A453B","lens":"#FFD166"},"blued-steel":{"sleeve":"#A9A9A9","ram":"#264653","rod":"#F4F4F4","collar":"#B8860B","hose":"#4D4D4D","lens":"#FFD166"},"oxblood-copper":{"sleeve":"#C04000","ram":"#4D4D4D","rod":"#E1E1E1","collar":"#FFD700","hose":"#5A453B","lens":"#FFD166"}},"night":{"lens":{"color":"#FFC24D","intensity":0.75,"describe":"the amber sight glass over the ram manifold, glowing while the hydraulics are charged","albedo":"#ffd166","findable":true}},"rev":1792408797,"materials":{"sleeve":{"kind":"metal","finish":"polished"},"ram":{"kind":"metal","finish":"satin"},"rod":{"kind":"metal","finish":"polished"},"collar":{"kind":"metal","finish":"polished"},"hose":{"kind":"fabric","finish":"canvas"},"lens":{"kind":"emissive","finish":"glow"}},"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","night_note":"match `albedo` in COLOR_0 exactly, make those vertices emissive at `color` and `intensity`, and drop your scene lights. findable false means that colour is no longer in this asset's geometry: skip the zone rather than guessing.","preview_v":1792438505,"mod_v":1792408797}