{"params":{"colorway":{"type":"choice","default":"weathered-oak","label":"Colorway","describe":"Curated Nature & Forest schemes. weathered-oak is bare mid-brown planking with a pale sheer band (the default); dark-pitch is a near-black tarred hull with warm benches; sun-bleached is driftwood cream throughout with pale green thwarts; moss-green is a green-painted hull over a dark timber interior.","options":["weathered-oak","dark-pitch","sun-bleached","moss-green"]},"length":{"type":"range","default":3.4,"label":"Length","describe":"Overall length of the boat in metres, stem to stem. REBUILDS the hull: stations are laid at a constant 0.34 m pitch, so a longer boat gains hull stations (and triangles) instead of stretching existing facets, and thwarts, ribs and oars respace. 2.6 m is a stubby tender, 4.2 m a long ferry skiff.","affects":"geometry","min":2.6,"max":4.2},"beam":{"type":"range","default":1.2,"label":"Beam","describe":"Maximum width of the hull in metres. A hull girth has nothing repeating in it, so this is an honest proportion knob: the whole section (outer skin, rail width, inner skin, bottom-board width, thwart and rib spans, oar spacing) is rebuilt from it at constant plank thickness. 0.95 m reads as a narrow racing skiff, 1.55 m as a fat pond punt.","affects":"geometry","min":0.95,"max":1.55},"strakes":{"type":"range","default":6,"label":"Strakes","describe":"Number of flat plank strakes per side between the keel and the rubbing strake, i.e. how faceted the clinker hull is. Whole numbers only. 3 is a hard-chined slab-sided boat, 7 is an almost round-bilged one; every value adds or removes real hull triangles.","affects":"geometry","min":3,"max":7},"thwarts":{"type":"range","default":2,"label":"Thwart benches","describe":"How many crossing bench planks sit in the boat, each with its own pair of carrying cleats. Whole numbers only. 1 is a single rowing thwart, 3 a three-seat ferry; the stern sheet and the bow breasthook are always there, and the stowed oars re-lay themselves across whichever thwarts exist.","affects":"geometry","min":1,"max":3},"ribs":{"type":"range","default":6,"label":"Frame ribs","describe":"How many timber frames band the inside of the shell, evenly spaced over the working length. Whole numbers only; 0 is a bare smooth interior (a plywood dinghy), 8 a closely framed clinker build. Each rib is a real banded prism embedded into the inner planking and standing 45 mm proud of it.","affects":"geometry","min":0,"max":8},"hull":{"type":"color","default":"#8c6a47","label":"Hull","describe":"Albedo of the outer planking below the rubbing strake \u2014 the largest zone, the weathered clinker strakes."},"sheer":{"type":"color","default":"#c2a479","label":"Sheer band","describe":"Albedo of the proud rubbing strake, the top strake above it and the gunwale rail cap \u2014 the light band that wraps the whole boat in one sheer line."},"inner":{"type":"color","default":"#5d4430","label":"Interior planking","describe":"Albedo of the inside faces of the hull sides, from the bottom boards up to the rail."},"floor":{"type":"color","default":"#75563b","label":"Bottom boards","describe":"Albedo of the bilge floor inside the boat and of the keel strip running down the outside of the bottom \u2014 the same timber, so they always change together."},"thwart":{"type":"color","default":"#a5855e","label":"Benches and frames","describe":"Albedo of the thwart planks, their cleats, the frame ribs, the bilge battens, the stern sheet and the bow breasthook \u2014 all the loose joinery inside the shell."},"oar":{"type":"color","default":"#e0d2b4","label":"Oars","describe":"Albedo of both stowed oars, loom and blade alike \u2014 one flat pale ash tone so they read against the dark bilge."},"iron":{"type":"color","default":"#57544e","label":"Ironwork","describe":"Albedo of the rowlock pads and thole pins \u2014 dull dark wrought iron."}},"presets":{"weathered-oak":{"hull":"#8c6a47","sheer":"#c2a479","inner":"#5d4430","floor":"#75563b","thwart":"#a5855e","oar":"#e0d2b4","iron":"#57544e"},"dark-pitch":{"hull":"#4a3527","sheer":"#a5855e","inner":"#3a2a1e","floor":"#5d4430","thwart":"#8c6a47","oar":"#c2a479","iron":"#57544e"},"sun-bleached":{"hull":"#c2a479","sheer":"#e0d2b4","inner":"#8c6a47","floor":"#a5855e","thwart":"#c8d98a","oar":"#f8f3ec","iron":"#87847c"},"moss-green":{"hull":"#4c8140","sheer":"#93c46a","inner":"#4a3527","floor":"#5d4430","thwart":"#a5855e","oar":"#e0d2b4","iron":"#57544e"}},"rev":1792408798,"materials":{"hull":{"kind":"wood","finish":"oiled"},"sheer":{"kind":"wood","finish":"oiled"},"inner":{"kind":"wood","finish":"oiled"},"floor":{"kind":"wood","finish":"oiled"},"thwart":{"kind":"wood","finish":"oiled"},"oar":{"kind":"wood","finish":"oiled"},"iron":{"kind":"metal","finish":"cast"}},"materials_note":"what each colour zone is made of: `kind` and `finish` name a procedural PBR material in https://polyfork.dev/materials.mjs (dressByAlbedo finds a zone by its albedo in COLOR_0). A zone not listed has not been classified.","preview_v":1792464938,"mod_v":1792408798}